DIN 17222 50CrV4 1.8159 Cold Rolled Steel Strips for Springs
Cold rolled steel strip for springs is distinguished by high dimensional accuracy and good surface quality and, in the cold rolled + hardened + tempered condition (H + A) offers the possibility of achieving high values of hardness, tensile strength and elastic limit.
50CrV4 1.8159 Introduce
50CrV4 1.8159 steel is related grades with the same range of alloying additives. It is distinguished by the higher carbon content, which makes it possible to achieve even higher hardness after heat treatment.51CrV4 / 50CrV4 / 58CrV4 / 59CrV4 grades are supplied as hot-rolled bars, drawn bars, wires, spring stripes, forgings are used for the production of heavy-duty springs, axles, crankshafts, connecting rods, compression springs, valve springs, springs, shock absorbers or spring washers.It is mainly supplied in an annealed, softened, heat-treated and raw conditions. Steel does not exhibit corrosion resistance, so products should be protected with greases or coatings.
50CrV4 1.8159 Equivalent Grade
| Steel grade according to DIN 17 222 | Comparable grade according to EURONORM 132 |
| Code number | Material number |
| 50 CrV 4 | 1.8159 | 50 CrV 4 |
50CrV4 1.8159 Dimensions and permissible deviations
Thickness: 0.1 to 4mm; Tolerances: +/- 0.008 to 0.11 mm
Width: 10 to 600mm; Tolerances: +/- 0.15 to 0.60mm
50CrV4 1.8159 Chemical composition
| Steel number | grade number | C | Si | Mn | P | S | Cr | V |
| 50CrV4 | 1.8159 | 0,47 to 0,55 | 0,15 to 0,40 | 0,70 to 1,10 | 0,035 | 0,035 | 0,90 to 1,20 | 0,10 to 0,20 |
50CrV4 1.8159 Treatment condition on delivery
Cold rolled + soft annealed : G
Cold rolled + hardened + tempered : H + A
50CrV4 1.8159 Mechanical properties in the cold rolled + soft annealed condition G
| Steel number | grade number | Tensile strength N/mm2 maximum | Elongation at break (L = 80 mm) % minimum | Vickers hardness maximum |
| 50CrV4 | 1.8159 | 740 | 10 | 220 |
50CrV4 1.8159 Tensile strength in the cold rolled + hardened + tempered condition (H + A)
| Steel number | grade number | Tensile strength N/mm2 |
| 50CrV4 | 1.8159 | 1400 to 2000 |
50CrV4 1.8159 Vickers hardness in the cold rolled + hardened + tempered condition (H + A)
| Steel number | grade number | Vickers hardness |
| 50CrV4 | 1.8159 | 415 to 590 |
50CrV4 1.8159 Surface condition
Strip to be supplied in the
1 cold rolled + soft annealed G or
2 cold rolled + soft annealed + cold rolled (G + K) condition
must have a bright, metallically clean surface.
Cold rolled + hardened + tempered (H + A) strip is supplied, as agreed at the time of ordering, with
1 grey-blue (GR),
2 bright (8K),
3 polished (P) or
4 polished and colour-tempered (P & AF) surface.
50CrV4 1.8159 Types of heat treatment
Approximate values for heat treatment and minimum hardness values in the hardened condition of cold rolled steel strips for springs
| Steel number | grade number | Annealed °C | Hardened in oil at °C | Tempered to °C | Vickers hardness in hardened condition minimum |
| 50CrV4 | 1.8159 | 650 to 690 | 845 to 875 | 300 to 500 | 680 |
50CrV4 1.8159 Acceptance testing and test certificates
EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.
Product Tags:
|
|
50CrV4 1.8159 Cold Rolled Steel Strip Images
|
